Well I finally have the handlebars finished.
You will notice where I cut the holes in the bars to run the electrical
wires, brake and clutch hoses. I added chrome grips, levers, master
cylinder covers and chrome brake hardware and the chrome switch housings.
I’m pleased with it so far. I priced a complete handlebar with master
cylinders and all internals, hoses, wires and throttle at around
$1800. I’ll only have about $350 tied up. No internal throttle this
time. I would need to have 1 1/4" bars for this. Maybe on my
next project. I’m trying to do this nicely but on the cheap. :)
In one of the pictures you will see two holes I drilled through the
top triple-tree clamp to run the wires through.
